Shandong Weite Transformer Factory
Call us on:+86-536-3863999   E-mail: asang@sd-weite.com
Products

10kV Three Phase Energy-saving Oil-immersed Amorphous Alloy Distribution Transformer

10kV three phase energy-saving oil-immersed amorphous alloy distribution transformer Performance and characteristic: amorphous alloy is a new type strip without crystal structure, this kind of new material with low eddy current loss because of low magnetizing power and high electrical...

Parameter

10kV  three phase energy-saving  oil-immersed amorphous alloy   distribution transformer



SH15 full-sealing oil-immersed type amorphous alloy transformer


type

Voltage combination and

tap range(KW)

Vector

group

No-load

loss

(KW)

On-load

loss

(KW)

No-load 

current

(%)

Short

circuit

impedance

(%)

Track

gauge

(mm)

HV

Tap

range

LV

S11-M-30

6

6.3

10

10.5

11

±5%

or
±

2x2.5%

0.4

Dyn11

0.033

0.60

1.50

4.0

550x550


S11-M-50

0.0430.871.40

S11-M-63

0.051.041.20

S11-M-80

0.601.251.20

S11-M-100

0.0751.501.00

S11-M-125

0.0851.800.90

S11-M-160

0.1002.200.70

S11-M-200

0.1202.600.70

S11-M-250

0.1403.050.70660x660

S11-M-315

0.1703.650.50

S11-M-400

0.2004.300.50

S11-M-500

0.2405.150.504.5
820x820

S11-M-630

0.3206.200.30

S11-M-800

0.3807.500.30

S11-M-1000

0.45010.30.30

S11-M-1250

0.53012.00.20
S11-M-16000.63014.50.20
S11-M-20000.75017.40.205.0
1070x1070

S11-M-2500

0.9020.20.20


(1)The technical parameter of transformer with special specification or non-standard transformer should be decided by negotiation by suppliers and buyers.

(2)The installation and design shall subject to overall drawing provided by our company.

(3)The transformer will adopt Yyn011 connection when its core is 3-phase with 3 legs.


Weite, established in 1988, is one of the leading and professional 10kv three phase energy-saving oil-immersed amorphous alloy distribution transformer manufacturers and suppliers in China. Equipped with advanced equipment and technology, our factory can offer you safe, quality and durable transformer with reliable performance.

Performance and characteristic:

amorphous alloy is a new type strip without crystal structure, this kind of new material with low eddy current loss because of low magnetizing power and high electrical resistivity can be used for the core for a new kind of energy-saving transformer regarded as a idea products for upgrade of power distribution network. The transformer adopts wound core that is 3-phase with 5 legs, and its section is rectangular. The winding produced by oxygen free copper or copper foil can raise the capacity of withstanding short circuit. The transformer adopting Dyn11 connection can avoid the influence of higher harmonic and improve the capacity of withstanding unbalanced charge, thus improving observably quality of power supply. The vacuum fill for transformer oil can eliminate the bubble in winding and insure the insulation dynamic. The conservator is canceled and the fin plate of corrugated tank is used as the heat dissipation component, it can isolate internal transformer from external atmosphere, avoid and retard the degradation and moistened insulation. 

Related Products

Product Categories

Fast Track

Copyright © Shandong Weite Transformer Factory