Shandong Weite Transformer Factory
Call us on:+86-536-3863999   E-mail:
Home > Exhibition > Content

Maintenance considerations for distribution transformer

Shandong Weite Transformer Factory | Updated: Nov 30, 2016

(1) Maintenance before opening must be level before the power switch off, and flying power signs. Then electroscope check maintenance device powered off, maintenance can be carried out;

(2) Maintenance, must be two people present, maintenance, guardianship;

(3) Maintenance personnel must be a professional electrician familiar with power distribution unit;

(4) Maintenance personnel must wear protective equipment using electrical insulated tools;

(5) Replacement of electrical appliances must be consistent with the original specifications, prohibit the use of unqualified substitutes;

(6) Maintenance, may not change the power distribution unit wiring shall not be free to remove the original switch;

(7) Maintenance ends, should be separated from the power distribution unit and power side began to gradually switch power on, the electroscope confirmed after the power is switched on, then power down level test;

(8) Maintenance ends at the same time, removed the power level power switch andis suspended on signs.

Previous: Power transformer brief introduction

Next: No Information

Product Categories

Fast Track

  • Feedback
    Shandong Weite Transformer Factory welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: Economic Development Zone, Qingzhou Town, Weifang City ,Shandong Province, China
    Tel: +86-536-3863999    
    Fax: +86-536-3863999    
Copyright © Shandong Weite Transformer Factory